Integration notes for connecting domes, NVRs and platforms over ONVIF and GB/T 28181, covering encoding, ports and time synchronization.
Sengel dome cameras and NVR support ONVIF and GB/T 28181 access. ONVIF is suitable for device discovery and standard PTZ control within the LAN, and GB/T 28181 is suitable for cross-network and cross-level platform cascading.
Access steps
First confirm the device firmware and protocol version, set a fixed IP, and then add the device to the platform; GB/T 28181 requires configuring the SIP server address, device number, registration password, and heartbeat cycle.
FAQ
The platform only outputs video but cannot control it, usually because the PTZ channel is not bound or the user has insufficient permissions; cross-network access failures are mostly related to port mapping, NAT and firewalls; if the recording time is inconsistent, the NTP time source should be unified.
Suggestions
Complete the ONVIF control test on the LAN before project delivery, then conduct national standard registration and code flow testing on the target network, and retain the equipment configuration list.
