Selection Guides

Gas Detection Camera Selection: Target Gas, Range and Placement

Select detection cameras by gas density, leak pattern, range, alarm threshold and explosion protection, with notes on mounting height and maintenance.

The gas detection camera puts the sensor and video in the same casing. When selecting the camera, it must meet not only the gas detection requirements, but also the on-site video and protection requirements.

target gas

The density of methane is lower than that of air and it accumulates upward after leakage. The detector should be installed above the leakage point. The density of carbon monoxide is close to that of air and should be placed at the height of people's activities. Confirm the gas type first, and then determine the sensor.

Range and Threshold

The measuring range should cover the highest possible concentration, and the alarm threshold should be set according to site specifications. When it is necessary to link the exhaust or shut-off valve, confirm whether the equipment provides relay output.

Explosion proof and protection

For chemical plant areas, select explosion-proof models according to hazardous area classification; for outdoor or humid environments, confirm the IP grade and anti-corrosion treatment. Power and signal lines must be laid according to specifications.

Installation and maintenance

Avoid strong airflow, direct steam blowing and obstruction, and keep the sensor air inlet clear. Calibrate periodically according to the instructions and keep calibration records; dirty lenses will affect video confirmation and should be included in inspections.

Selection Guides
Contact Us

Tell Us About Your Site

Share distance, target type, transmission conditions and mounting position — we will recommend models, zoom and accessories.

Call WhatsApp Email
Call WhatsApp Request a Quote