Deployment workflow for 5G domes, from signal survey, SIM and data plan, power supply to platform access.
5G deployment and control balls are suitable for locations that do not have optical fiber and require rapid deployment. Signal and power supply confirmation should be completed before the equipment is in place, otherwise it is easy to go online but the code stream is unstable.
Signal test
Use a mobile phone or test terminal to measure the operator's signal strength and upload rate at the installation location, and confirm the direction and obstruction of the base station. If necessary, adjust the installation height or add an external antenna.
SIM and traffic
Select an IoT card or traffic card that supports the corresponding frequency band, and confirm the uplink bandwidth and monthly traffic. Multi-channel high-definition or long-term backhaul requires a higher data plan.
Power supply
Fixed points can use mains power plus UPS; temporary deployment uses built-in lithium batteries or mobile power supplies, and the capacity is calculated based on equipment power consumption and duty time.
Platform access
The device connects to the public network through 4G/5G routing or built-in modules and registers with the platform or NVR. After going online, test real-time preview, PTZ control, video playback and disconnection reconnection.
